LP12 DJI M30 update: Essential instructions and tips

Dear professional customers,

As part of our commitment to providing high-quality equipment for drone users, we would like to inform you of an LP12 DJI M30 update.

Pre-installation requirements: It is crucial to update your M30 drone to the latest firmware version before installing Kit LP12. To do this, make sure that the Kit LP12 is not connected while the drone is being updated.

Current LP12 firmware version: Make sure your LP12 Kit firmware is also up to date, precisely version V03.03.00.02. Using an earlier version may cause write-protection errors on the disk. In the event of such difficulties, please contact us to arrange a return for repair.

LP12 firmware update instructions :

Firmware download: You can download the latest version of LP12 firmware (V03.03.00.02) via the following link: http: //en.gzczzn.com/product/download/25.

Update steps : Connect the LP12 Kit to a computer using a micro USB cable. Once connected, a U disk storage drive will appear. Delete the old firmware version and copy the new one to the root directory of the U disk. Then connect the LP12 to your M30 drone and switch it on to start the automatic update, which takes about three minutes.

Important instructions during the update : Make sure the drone battery has more than 50% charge. The LP12 will reboot twice during the update. It is important not to disconnect the LP12's power cable or switch off the drone during this process.

Should you have any questions or require further assistance with this update, please do not hesitate to contact us.