DJI M300 RTK upgrade with DJI RC Plus radio

Here is a step-by-step guide on how to perform an offline update on DJI Assistant 2, on your DJI M300 RTK drone. This is an important process that can help you get the most out of your equipment. Here's how to do it:

1. Go to the page dedicated to M300 RTK on the official DJI website: https://enterprise.dji.com/matrice-300/downloads. Here you can download the firmware pack version v57.00.01.00 for an offline update.
2. It is important to note that each drone must be connected to a computer individually for the update, as the DJI Assistant 2 does not allow updating multiple DJI devices simultaneously.
3. Make sure you have a good internet connection and that your DJI drone is powered with at least 25% battery level.
4. To get started, launch the DJI 2 Assistant (version v2.1.9) and log in with your DJI account. An important point to note, the M300 RTK is not compatible with the Mac version, so you will need a computer running Windows.
5. Once logged in, locate the "Offline Update" button on the left side and click it.
6. From there, select the offline firmware package you downloaded in step 1 and click to update. This will automatically update your firmware.
7. A message will appear to inform you that the update was successful. Congratulations, the firmware update is complete!
8. Following the update, turn on your DJI RC Plus remote control, launch the DJI Pilot 2 application and select "MATRIX 300 RTK" on the home page to link your remote control to your M300 RTK.
9. Once linked, go to the "Data and Privacy" option in the upper left corner of the DJI Pilot 2 home page. Here, choose "Clear DJI Device Log" > "Select Device" > "Select Device" (make sure NOT to select the remote control). Confirm the selection of your drone, then click on "Clear data from selected device". Once the data is cleared, you can use the RC Plus with your M300 RTK.

A quick note to finish: when using the M300 RTK + RC Plus combination for the first time, you will need to use this offline update DJI Assistant 2. Once this first update is done, further updates of your M300 RTK + RC Plus combination can be done via "Update all applications" / "Offline application update" / "Update DJI Assistant 2 firmware".

Finally, be aware that if your M300 RTK is updated to a compatible firmware version that supports RC Plus, it will not

can no longer be combined or used with a Smart Controller. If you need to use the Smart Controller again, you will need to perform the DJI Assistant 2 offline update to update the firmware of your M300 RTK to version v07.00.01.00.

We hope you find these instructions useful. Enjoy your flight!