In a race, microseconds count. Glasses down, thumbs up - are you ready for a real 250 Hz radio link? End-to-end latency: barely noticeable. Nothing else comes close! Thanks to 2.4 GHz technology, we've taken the best of Crossfire and made it smaller and faster. The end result: smaller antennas, more speed, a range of several days.
PRESENTATION OF TBS TRACER - RADIO SYSTEM "CROSSFIRE" 2.4 GHZ
- 250 Hz: fastest radio link and telemetry available
- New 2.4 GHz technology not found in any other radio link
- 3 ms end-to-end latency
- Crossfire engine for optimum compatibility and functionality
- JR" and "LITE" form-factor transmitters
- Nano-sized receiver with antenna diversity
- 15mi + / 25km + range
- For drones, planes, helicopters, cars and boats
THE FASTEST RADIO LINK
In a race, microseconds count. Glasses down, thumbs up - are you ready for a two-way radio link at 250 Hz? End-to-end latency: basically zero (okay, 3ms!). Range: for days. Nothing comes close! We've taken the best of Crossfire and made it smaller and faster.
NOT JUST FOR RACE AND FREERANGE DRIVERS.
Only one operating mode meets all requirements. A refresh rate of 250 Hz. Lots of penetration and range to surpass even the most serious video link. Full telemetry capability is standard, without any degradation of range! Thanks to Crossfire's pedigree, UAV pilots, traditional radio control pilots and everyone in between can instantly access the familiar range of compatible software, devices, remote controls and mounting boards.
USABILITY
OTA firmware updates, auto-bind, multi-bind, configuration of LUA devices such as flight controller PIDs, etc. and cloud connectivity: no problem! These are all features that TBS has introduced for the first time in the R/C space with TBS Crossfire! All receivers arrive in link mode and it remembers your link on all your radios, so the link button is technically never needed.
UNDER THE HOOD
TBS Tracer runs on the Crossfire engine. More than 6 years of active development and by far the most popular R/C system for PVF enthusiasts! You instantly benefit from the same reliability, features and compatibility that UAV pilots consider synonymous with peace of mind. So what's the difference? Higher update rate, lower latency, smaller antennas due to higher frequency. Crossfire users will feel right at home!
THE TBS WARRANTY
Throughout our more than 10 years of existence, software updates have always been free, continuous and plentiful. The hardware is designed for longevity and comes with a wide range of features that have not yet been unlocked. Support has always been focused on customer satisfaction. For the drivers, by the drivers.
That's why TBS products are the most popular and why the investment in TBS Tracer will continue to pay off in the future - just as TBS Crossfire continues to do for all enthusiasts. As a thank you from us for your support, visit our website and enter the serial number of your Crossfire as a discount code for 25% off all TBS Tracer TX & RX products!
CHARACTERISTICS:
- Adaptive and robust long-range remote control system for your UAV and aircraft
- Low latency, 250 Hz update rate (5 times faster than normal - the fastest in the world) for stunning accuracy
- Bi-directional communication link with real-time vital links and telemetry
- Updates firwmare OTA, auto-bind, multi-bind support
- TBS Cloud connectivity with telemetry output for smartphone applications
- Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol
- An "unlimited" number of people can fly at the same time.
- Output power: 25 mW / 100 mW
- 8 or 12 channel output via CRSF, SBUS, Reverse SBUS or PPM
- Serial modem capable of transmitting MAVLink or other serial protocols (uplink and downlink)
INCLUDES
- 1 x TBS Tracer Nano TX
- 3 x TBS Tracer Nano RX
- 6 x TBS Tracer Immortal T antenna
DOWNLOADS
- TBS plotter manual
- TBS Agent X (for software updates)
- Latest OpenTX LUA Scripts for Crossfire
- TBS Cloud - Wifi Firmware
- OpenTX Nightly firmware
TBS TRACER NANO TX SPECIFICATIONS:
- Latency and refresh rate: 3 ms, 250 Hz
- Output power: 100 mW
- Frequency bands: ISM 2.4 GHz
- Input voltage: 3.5 - 13 V
- Connector: USB-C
- Power consumption: 1.1 W (@ 10 mW) - 2 W (@ 100 mW)
- Dimensions: 65 x 48 x 22 mm (JR module size)
- Radio compatibility: LITE module bay (e.g. TBS Tango 2, Taranis X-Lite, X9 Lite), OpenTX V2.1 +. The TBS Tracer Nano TX is recommended for use in Futaba and Spektrum remotes that do not have a JR module bay.
* Output power modes may not be available due to local regulatory limitations.
TBS TRACER NANO RX SPECIFICATIONS:
- Antnna Ports: 2x u.FL / IPEX (diversity)
- Contents of packaging: 1x TBS Tracer Nano RX, 2x Immortal-T, silicone cables
- Protocols: 2x CRSF, SBUS, PPM, 6x PWM, SmartAudio 2.0 / 2.1 (VTx control)
- Weight: 0.5 g (receiver only)
- Size: 11 mm x 18 mm
Notice
There's no notice yet.